The Ikon ITG-48 is an outstanding 48-inch natural gas griddle with advanced thermostatic control. It offers flexibility as it can run on natural gas or liquid propane, and each unit comes with a conversion kit. Every 12 inches of the griddle top has a convenient gas control knob for precise heat adjustment. The cabinet is crafted entirely from high - quality stainless steel, with double - wall insulation on the sides. It stands on adjustable stainless steel legs with non - skid feet for stability. The 1 - inch thick griddle plate and 'U' shaped burners ensure even heat distribution across the cooking surface. With four burners, each delivering 30,000 BTUs, it provides a total of 120,000 BTU/hr of power. This griddle is fully serviceable from the front, and the front edge stays cool to the touch. The back and side splash guards are firmly welded to the griddle plate, and the flue at the back offers great ventilation. It also features a 3 - 1/4 - inch grease drawer with a 'weep hole' and baffle, and the 4 - inch wide grease trough fits a standard spatula. This griddle is CSA Blue Flame, Design, and General Certified, meeting both Canadian and applicable US standards for gas - fired items.

Using your Ikon ITG - 48 griddle is a breeze. First, make sure to connect it to the appropriate gas source (natural gas or liquid propane with the conversion kit). Adjust the gas control knobs on every 12 - inch section of the griddle top to get your desired cooking temperature. Place your food on the 1 - inch thick griddle plate and start cooking. When you're done, turn off the gas supply. As for maintenance, regularly clean the grease drawer and trough to prevent blockages. Wipe down the griddle plate after each use to keep it in good condition. Check the burners and ventilation system periodically. Remember, this griddle is CSA certified, so follow all safety instructions to ensure its long - lasting performance and your safety.