The Biro Model 1433FH-3 meat band saw is a top - notch choice for meat processing. It features a 108 - inch by 5/8 - inch blade size, offering a large cutting area. Powered by a 3 - horsepower motor, it has the strength to handle tough meat cutting tasks. Its blade speed is approximately 3600 feet per minute, and higher speeds are available at no extra cost. The saw is built with stainless steel, ensuring durability and resistance to corrosion. BIRO's exclusive EZ - flow meat carriage reduces operator fatigue and boosts productivity. Both models of 1433 come with a watertight magnetic starter with thermal overload protection, a removable lower wheel, and a double V - belt pulley drive system. This saw is NSF, UL, and CSA certified, meeting high - level safety and food - related standards. It has a length of 35 inches, a width of 31.75 inches, and a height of 68.5 inches. The voltage requirement is 208 - 220/440 at 60 Hz with 3 phases.

Using the Biro Model 1433FH - 3 meat band saw is straightforward. First, make sure the saw is properly plugged into a power source with the correct voltage and phase. Then, place the meat on the EZ - flow meat carriage. Turn on the saw using the starter, and the blade will start moving at a high speed. You can then guide the meat through the blade for cutting. When using the saw, always wear appropriate safety gear like gloves and goggles. Don't overload the saw beyond its capacity. For maintenance, regularly check the blade for sharpness and replace it if it's dull. Keep the stainless - steel body clean to prevent corrosion. Also, check the double V - belt pulley drive system and the lower wheel regularly. If the lower wheel needs cleaning or replacement, it's easy to remove and reinstall. This will help ensure your saw lasts for many years with minimal issues.