• Utilizes hot water for effective sanitizing
• Consumes only 0.62 gallons of water per rack, highly water - efficient
• Capable of cleaning up to 38 racks in an hour, ensuring high - speed operation
• Cycle time ranges from 120 to 275 seconds depending on the setting
• Compact design that easily fits under most countertops, ideal for limited - space kitchens
• Features a 17 - inch door opening height, accommodating various rack types
• Comes with one peg and one combination dish rack for added convenience
• Equipped with an energy recovery system that recycles hot water vapour every cycle, saving energy costs

Quickly and effectively clean and sterilize racks of dishes, glassware, pots, pans, and utensils with the Hobart LXeR - 30 Advansys. This eco - friendly commercial dishwasher offers three wash cycles: light, normal, and heavy. On the light cycle, it can clean up to 30 racks per hour; on normal, up to 24 racks; and on heavy, up to 13 racks. Cycle times are 120 seconds on light, 146 seconds on normal, and 275 seconds on heavy. The heavy cycle can achieve an NSF - certified clean on pots and pans.

The Advansys LXeR - 30 uses a 4.9 kW booster heater to heat water to the minimum 180°F required for sanitizing. With Hobart’s energy recovery technology, it recycles hot water vapour from wash and rinse cycles to preheat water for the next cycle, reducing energy costs and steam release. It has an intelligent microcomputer with a digital display above the door for easy setting and monitoring. Advanced service diagnostics and low - chemical warnings help you keep the machine in good condition. The advanced diagnostics also detect clogged wash arms and offer automated delime and clean cycles.

This powerful dishwasher fits under the counter, with a 17 - inch opening for various rack types. It includes detergent and rinse - aid pumps, ready for immediate use. The unit is rated to 30 amps maximum and doesn't need a 40 - amp breaker. You must wait at least 90 seconds between each cycle. Note that the specification sheet is for Hobart's main LXe dishwashers, not this specific 30 - amp - breaker model.

NSF Certified, Made in America, UL Canada & USA Certified, Energy Star Partner, and comes bare wire (must be hardwired).

Using the Hobart LXeR - 30 Advansys dishwasher is a breeze. First, make sure it's properly hardwired as it comes with bare wire. Place your dishes, glassware, pots, and pans in the included peg or combination dish rack, then slide it into the dishwasher through the 17 - inch door opening. Select your desired wash cycle - light, normal, or heavy - using the digital display on the intelligent microcomputer above the door. Once you start the cycle, sit back and let the machine do its job. Remember, there's a 90 - second wait time between each cycle. When it comes to maintenance, pay attention to the low - chemical warnings. Refill the detergent and rinse - aid pumps as needed. The advanced diagnostics will tell you if the wash arms are clogged. Use the automated delime and clean cycles when the machine is shut off to keep it in top shape. This dishwasher is energy - efficient, but make sure it's connected to a 30 - amp breaker as it's not rated for 40 amps. Enjoy the benefits of hot water sanitizing and low water consumption in your kitchen!