• Sanitize dishes with hot water for a hygienic clean
• Consumes only 0.85 gallons of water per rack, saving on water bills
• Capable of cleaning 58 - 65 racks per hour, ensuring high - efficiency operation
• Three timed wash cycles of 60 - 240 seconds (adjustable based on setting) for a thorough clean
• Features a large 17 - inch door opening to fit various cookware and dishes
• Equipped with a 5 kW electric heating unit for optimal water temperature
• Operates at 208 - 240V / 60 Hz / 3 Phase

Quickly and efficiently clean and sterilize racks of dishes, glassware, pots, pans, and utensils with the Hobart Stero SD3 - 1 Door - Type Dishwasher. This energy - efficient dishwasher can be set up as a hot water or chemical sanitizing unit according to your needs. It uses less energy and water, which helps you save on utility costs. The dishwasher can clean 58 racks per hour with hot - water sanitization or 65 racks per hour with chemical sanitization. Three timed wash cycles of 1, 2, or 4 minutes ensure an effective clean. The 5 kW electric heating unit maintains a minimum temperature of 180°F for hot - water sanitization or 140°F for chemical sanitization. Constructed of stainless steel, it has interchangeable upper and lower wash and rinse arms. Clear digital controls let you select cycle lengths and get error notifications. Its large 17 - inch door opening can accommodate large pots and pans.

Specifications: Model SD3 - 1, width 28.75 inches, depth 34 inches, height 66.5 inches, voltage 208 - 240V, 60 Hz, 3 Phase, rated amps 24.9 Amps, 5 kW heating unit, no booster heater, 58 racks per hour, wash cycle time 60 - 240 seconds, water usage 0.85 gal, water temperature 180°F (hot water) or 140°F (chemical), door opening 16.87 inches, door - type and single - rack dishwasher.

This dishwasher is NSF Certified, meaning it meets public health protection standards for food safety. It's also UL Canada & USA certified, having passed strict safety tests. It's an Energy Star Partner, operating efficiently and reducing costs. Note that it comes with bare wire and must be hard - wired, no standard plug included.

Using the Hobart Stero SD3-1 dishwasher is a breeze. First, open the 17 - inch door and load your dishes, glassware, pots, and pans inside. Make sure not to overcrowd them so that water can reach all items. Then, select your preferred wash cycle. You have three options with durations ranging from 60 to 240 seconds. If you're using hot - water sanitization, the 5 kW heating unit will heat the water to 180°F. For chemical sanitization, the temperature will be set to 140°F. Once you've made your selection, close the door and start the cycle. During operation, keep an eye on the clear digital controls. If there's a problem, it will show an error notification. After the cycle is complete, open the door and unload your clean items. When it comes to maintenance, regularly clean the wash and rinse arms. Since they're interchangeable, you can easily take them out for a good scrub. Also, check the water inlet and drain for any blockages. Remember, this dishwasher is hard - wired, so if you have any electrical issues, it's best to call a professional. It's NSF Certified, so you can trust it for food - safe cleaning, and being an Energy Star Partner, it's cost - effective to run.