• Utilizes hot water for effective sanitizing
• Consumes only 0.85 gallons of water per rack, highly water-efficient
• Capable of cleaning 58 racks in just one hour
• Each cycle ranges from 60 to 240 seconds depending on the setting
• Features a 17-inch door opening to fit large pots and pans
• Equipped with an 8.5 kW built-in booster heater
• Operates on 208-240V / 60 Hz / 3 Phase power

Effortlessly and rapidly clean and sterilize racks of dishes, glassware, pots, pans, and utensils with the Hobart Stero SD3-2 Door-Type Dishwasher. This energy-efficient commercial dishwasher uses a mere 0.85 gallons of water per rack and can clean 58 racks hourly. Three timed wash cycles of 1, 2, or 4 minutes ensure a thorough clean. The 8.5 kW built-in booster heater guarantees a minimum temperature of 180°F for the final rinse. Constructed from stainless steel, it has interchangeable upper and lower wash and rinse arms. Clear digital controls allow you to select cycle lengths and receive error notifications. The large 17-inch door opening can accommodate various cookware.

Specifications:

• Model: SD3-2
• Width: 28.75 inches
• Depth: 34 inches
• Height: 66.5 inches
• Voltage: 208-240V
• Hertz: 60 Hz
• Phase: 3 Phase
• Rated Amps: 45.4 Amps (With Electric Heat & Booster)
• Heating Unit: 5 kW
• Booster Heater: 8.5 kW
• Racks per Hour: 58
• Wash Cycle Time: 60-240 seconds
• Water Usage: 0.85 gal
• Water Temperature: 180°F
• Door Opening: 16.87 inches
• Dishwasher Type: Door-Type
• Type: Single Rack Dishwasher

Certifications:

• NSF Certified: Meets NSF standards for public health protection and food safety.
• UL Canada & USA: Tested and meets US and Canada's safety standards.
• Energy Star Partner: Meets strict energy performance standards, cost-effective to operate.
• Bare Wire: Comes bare wire and must be hardwired, no standard plug.

Using the Hobart Stero SD3-2 dishwasher is a breeze. First, open the 17 - inch door and place the dishes, glassware, pots, and pans inside. Select your desired wash cycle from the three timed options (1, 2, or 4 minutes) using the clear digital controls. Then start the machine. The dishwasher will use only 0.85 gallons of water per rack to clean and sanitize your items. The built - in 8.5 kW booster heater will heat the water to 180°F for the final rinse, ensuring proper sanitization. Here are some important notes. Since this product comes with bare wire, it must be hardwired by a professional electrician. Make sure to check the voltage (208 - 240V), hertz (60 Hz), and phase (3 Phase) requirements before installation. For maintenance, regularly clean the upper and lower wash and rinse arms as they are interchangeable and can be easily removed. Also, keep an eye on the digital controls for any error notifications. If there are issues, refer to the spec sheet or contact customer service. With proper use and maintenance, your Hobart Stero SD3 - 2 dishwasher will serve you well for a long time.