This Hatco GRAH-36 36-inch Glo-Ray Aluminum Infrared Strip Heater with Toggle Controls is a top - notch solution for food holding. It operates at 800W on a single - phase system. The pre - focused heat pattern evenly covers the entire holding surface, ensuring there are no 'cold spots' and consistent holding temperatures. There are protective wire guards under the heating element for safety. The heater uses a pre - focused heat pattern and specially - designed reflectors to blanket food holding areas, keeping products at the perfect serving temperature without drying them out or overcooking. The sturdy continuous aluminum housings prevent sagging, and the reflector maintains a consistent, even heat pattern without blackening. The result is hot, fresh, ready - to - serve food. It has dimensions of 36 inches wide, 6 inches deep, and 2.5 inches high. It's a high - watt model (800 Watts) and is available in 120, 208, and 240 Volts. It's NSF Certified, Made in America, UL Canada & USA Certified, and CE Certified, meeting strict safety and quality standards.

Using this Hatco Glo - Ray Aluminum Infrared Strip Heater is easy. First, choose the appropriate voltage (120, 208, or 240 Volts) according to your needs and connect it to a suitable power source. Place your food in the holding area under the heater. Then, use the toggle controls to turn it on. The heater will start to emit heat, keeping your food at the right temperature. When using the heater, make sure it's installed in a stable position. Avoid placing any flammable materials near it. Don't touch the heating element directly as it can get very hot. For maintenance, regularly check the protective wire guards for any damage. Wipe the aluminum housing with a soft, dry cloth to keep it clean. If there are any issues, check the power connection first. If the problem persists, contact Hatco's customer service for further assistance.