This Hatco GRAH-60 60-inch Glo-Ray Aluminum Infrared Strip Heater with Toggle Controls is a top - notch choice for food holding. It operates at 1400W, single - phase. The pre - focused heat pattern evenly covers the entire holding surface, ensuring consistent temperatures without any 'cold spots'. There are protective wire guards under the heating element for safety. The heater uses specially - designed reflectors and a pre - focused heat pattern to blanket food holding areas, keeping products at optimum serving temperatures without drying out or over - cooking the food. Its sturdy continuous aluminum housings prevent sagging, and the reflector won't blacken, maintaining an even heat pattern. This results in hot, fresh food ready to serve. With dimensions of 60'W x 6'D x 2.5'H, it's a high - watt (1400W) model available in 120, 208, or 240 Volts. It's NSF Certified, made in America, and certified by UL Canada & USA and CE, meeting strict safety and quality standards.

Using this Hatco GRAH - 60 heater is easy. First, choose the appropriate voltage (120, 208, or 240 Volts) according to your needs and connect it properly. Then, use the toggle controls to start heating. Place the food you want to keep warm under the heater. The pre - focused heat pattern will evenly cover the food, keeping it at the right temperature. When using, make sure the area around the heater is well - ventilated. Don't place any flammable materials near it. Also, keep in mind that the protective wire guards are there for your safety, so don't remove them. For maintenance, regularly check the reflector to ensure it's clean and not blackened. If there's dust on the heater, use a soft cloth to gently wipe it. Avoid using harsh chemicals as they may damage the aluminum housing. This heater is designed to be durable, but with proper use and maintenance, it will serve you well for a long time.