The Fetco HWD-2102 hot water dispenser is a top - notch product that offers excellent performance. It features a 1/4 - inch male flare fitting for water inlet, ensuring a stable water supply. With a minimum flow rate of 1.1/2 gpm (507 lpm) and a water pressure range of 20 - 75 psig (276 - 517 kPa), it can meet various needs. In terms of cup output, it can dispense 131 cups of 8 - oz, 87 cups of 12 - oz, 66 cups of 16 - oz, and 74 cups of 52 - oz water per hour. The newly - designed dispenser adheres to FETCO’s high standards of innovation, reliability, durability, and quality. It has a simple interface, making hot water dispensing easy. When the green light is on, you know the water is hot, which is convenient for self - service setups. The unit also has a silicone tap to prevent glass and ceramic breakage and fully insulated walls to save heat and electricity. 110V models don't need special wiring, just plug into a regular outlet. The dispenser has a width of 8 inches, a depth of 16 inches, and a height of 19 inches. It weighs 19 lbs when empty and 36 lbs when filled. It operates on 100 - 120V, 1 - Phase power with a wattage of 1.5 kW and has a capacity of 24 inches.

Using the Fetco HWD - 2102 hot water dispenser is a breeze. First, make sure to connect the water inlet using the 1/4 - inch male flare fitting. Plug the unit into a regular outlet if it's a 110V model. When the green light on the dispenser is illuminated, it means the water is hot and ready to use. You can dispense water into cups of different sizes like 8 - oz, 12 - oz, 16 - oz, or 52 - oz. For self - service setups, this feature makes it really convenient. As for maintenance, keep an eye on the water inlet to ensure there are no blockages. Wipe the exterior of the dispenser regularly to keep it clean. Since the unit has fully insulated walls, it helps save electricity, but still make sure to turn it off when not in use for a long time. Also, be careful with the silicone tap to prevent any damage. If you notice any problems with the flow rate or water pressure, check the connections and the settings.