The Carter-Hoffmann hotLogix HL1-18 Heated Holding Cabinet is a top - notch solution for keeping cooked food warm. It features a recessed manual dial for easy temperature adjustment, paired with a digital thermometer for accurate readings. The removable bottom - mounted blower heater can heat up to 190°F (88°C) and pre - heat to 160°F (71°C) in around 30 minutes. Its single - wall, non - insulated aluminum build is lightweight yet sturdy, with a 0.063 exterior in 2V finish and a 0.125 natural aluminum base frame. The single - pane tempered glass door in an extruded aluminum frame has a santoprene gasket and a heavy - duty chrome - plated latch with a magnetic catch. Equipped with 5 - inch diameter rubber - tread casters, two of which have brakes, and adjustable edge - mount hinges with a chrome - plate finish. The adjustable, removable tray racks with universal wire slides, spaced at 3 inches, can hold 12”x20”x2.5” steam table pans, 18”x26” sheet pans, and GN 2/1 or 1/2 pans. This cabinet comes in various heights like under - counter, half height, ¾ height, and full height. It operates on 120 volts, 1750 watts, 15.0 amps, 60 Hz, single - phase power, with an eight - foot rubber cord and a grounding plug (NEMA 5 - 20P). It is ETL Certified, meets North American sanitation standards, and is proudly made in the USA.

Using the Carter - Hoffmann hotLogix HL1 - 18 Heated Holding Cabinet is a breeze. First, make sure it's plugged into a proper 120V power outlet using the NEMA 5 - 20P plug. Then, use the recessed manual dial to set your desired temperature. The digital thermometer will show you the exact temperature inside. For pre - heating, wait about 30 minutes to reach 160°F (71°C). When placing your food, use the adjustable and removable tray racks to fit 12”x20”x2.5” steam table pans, 18”x26” sheet pans, or GN 2/1 or 1/2 pans. Keep in mind that the cabinet can heat up to 190°F (88°C). When moving the cabinet, use the 5 - inch diameter casters. Two of them have brakes, so lock them when you've placed it in the right spot. For maintenance, regularly clean the interior and exterior with a mild cleaner. Don't use abrasive materials on the tempered glass door. Also, check the blower heater regularly, and if it needs cleaning or replacement, follow the manufacturer's instructions. Since it's made of aluminum, avoid exposing it to harsh chemicals. And remember, it's ETL Certified and meets North American sanitation standards, so keep it clean to maintain its safety and performance.