The Hatco Refrigerated Drop-In Cold Well is a full-sized unit that wraps pre-chilled food products to keep them fresh and flavorful. It features an auto-defrost function controlled by a programmable advanced electronic controller. The well has optimal and eco-friendly insulation on the sides and bottom, ensuring even cooling from top to bottom, better cold retention, and cost savings. It also comes with an adjustable condensing unit that can be rotated 90° or 180° for easy venting adjustments. Specifications include model CWB-1, width of 19 inches, depth of 27 inches, height of 25.5 inches, 120 volts, 804 watts, 6.7 amps, single phase, 1/4 HP, pan capacity of one 12'x20' pan, stainless steel construction, electric energy type, drop-in installation, and it's a cold well. This product is made in the USA, NSF certified for food safety, UL certified for safety, and comes with a NEMA 5-15P plug.

Using this Hatco cold well is easy. First, make sure it's properly installed and plugged into a 120V outlet. Place your pre-chilled food products in the pan. The auto-defrost function will take care of keeping the unit frost - free, so you don't have to worry about manual defrosting. Just set the temperature through the programmable advanced electronic controller. When it comes to maintenance, clean the interior regularly with a mild detergent and warm water. Check the condensing unit periodically and ensure proper ventilation. You can rotate it as needed for better venting. Also, since it's NSF and UL certified, you can be confident in its safety and food - handling capabilities. Keep in mind that it's made in the USA, so you're getting a quality product. Always follow the electrical safety guidelines when using the NEMA 5 - 15P plug.