This Delfield hot food well is a great addition to your commercial kitchen. It comes with adapter bars that can fit 12” accessories and 20” pans. The single wet well, 8 inches deep, is crafted from stainless steel and connected to a 1” stainless drain. It features a single thermostatic temperature control wired to a main control panel with 2 feet of conduit and wire. You'll need to install the control panel on - site. It comes with a one - year parts and 90 - day labor standard warranty. Note that the image shown above is different. The product has a width of 59.5 inches, a depth of 26 inches, and a height of 11 inches. It operates at 208 - 230 volts, 60 hertz, with 20 / 22 amps and 4000 / 4800 watts, and is single - phase. It can hold 4 full - size pans and is made of stainless steel with thermostatic control. It's an NSF - certified product, meeting public health protection standards for food safety. It's also UL - certified for both Canada and the USA, having passed strict safety tests.

Using this Delfield hot food well is easy. First, install the control panel at your chosen location as per the wiring provided. Then, place your 12” accessories or 20” pans on the adapter bars. Set the desired temperature using the thermostatic control. Remember, this is a single - tank wet well, so you'll need to use it with water in the well. For safety, always make sure the unit is properly grounded and that you're using the correct voltage and phase. When it comes to maintenance, clean the stainless - steel well regularly with a mild detergent. Check the drain for any blockages. If you run into any issues, refer to the standard one - year parts and 90 - day labor warranty for support.