- Operates at a 25 - gallon - per - minute flow rate
- Made of heavy - duty engineered thermoplastic
- High grease separation efficiency
- Minimum 50 - pound grease capacity
- Exterior is smooth and easy to clean
- 2 - inch connection
Preventing excessive grease buildup and blockages in your plumbing is a breeze with the Canplas Endura 25XT Grease Interceptor. Grease interceptors are now the norm in grease management, separating non - petroleum fats, oils, and grease from wastewater.
Appearance and Composition
Canplas Endura tanks are molded to avoid any seams that might cause leaks. The eco - friendly, engineered thermoplastic is tough and ensures the tanks won't corrode, chip, or peel even in harsh conditions. The Endura 25XT is a new, user - friendly model that can be installed on the floor, in - floor, or slightly recessed. Its cover can handle 440 pounds (220 kg) of pedestrian or light traffic, and the tool - free easy - open latches make accessing the inside a snap. The smooth exterior surface provides rigidity without ribs, making it much easier to clean than other tanks.
A small 2 - inch connection and an air - tight silicone seal stop odors from escaping the interceptor.
Flow Rate and Capacity
This Endura grease interceptor can work at 220°F (104°C) and has a 25 - gallon - per - minute flow rate with a minimum 50 - pound grease capacity. The open - concept internal design offers great grease retention and debris separation.
| Specifications |
|---|
| Model | 3925XTA02 |
| Width | 18.5 inches |
| Depth | 31.25 inches |
| Height | 16.5 inches |
| Unit Weight (Empty) | 35.61 lb |
| Flow Rate | 25 GPM |
| Grease Capacity Min | 50 lb |
| Grease Capacity Actual | 72.55 lb |
| Surface Load Capacity | 440 lb |
| Connection Size | 2 inches |
| Liquid Capacity | 30.6 gal |
| Material | Plastic |
| Maximum Temperature | 220°F / 104°C |
| Colour | Grey |
NSF Certified: This item meets NSF's standards for public health protection, ensuring it's designed and built to promote food safety.
Using your Canplas 3925XTA02 Grease Interceptor is straightforward. First, choose the right installation spot. You can install it on the floor, in - floor, or slightly recessed. Make sure the area can support the weight of the interceptor, as the cover can handle up to 440 pounds of pedestrian or light traffic. Connect the 2 - inch pipes properly and ensure the air - tight silicone seal is in place to prevent odors. When it comes to maintenance, check the grease capacity regularly. The interceptor has a minimum 50 - pound grease capacity and an actual 72.55 - pound capacity. Once it gets close to full, it's time to empty it. Cleaning is easy because of the smooth exterior. Just wipe it down as needed. Keep in mind that the interceptor can operate at a maximum temperature of 220°F (104°C), so don't expose it to higher temperatures. Also, since it's made of plastic, avoid using abrasive cleaners that could damage the surface. And because it's NSF Certified, you can be confident it meets public health and food safety standards.
