- Flow rate of 25 gallons per minute (GPM)
- Made of heavy-duty engineered thermoplastic
- Compact, long - lasting, and easy to use
- Grease capacity of at least 50 lb
- Smooth exterior for easy cleaning
Preventing excessive grease build - up and serious plumbing blockages is a breeze with the Canplas Endura 25 GPM Low Profile Grease Interceptor. Grease interceptors are the industry standard for grease management, separating non - petroleum fats, oils, and grease from wastewater.
Appearance and Composition
Canplas Endura tanks are molded to avoid seams that could cause leaks. The eco - friendly engineered thermoplastic is tough and won't corrode, chip, or peel, even in tough conditions. The Endura Lo - PRO is just 11 inches high and only needs 6 inches of extra space on top to access and remove internal parts. It's great for under - sink installation and can sit right on the floor. The tank cover can hold 440 lb (220 kg) of pedestrian or light traffic. The tool - free easy - open latches make it easy to access the tank interior. A new production process gives it a smooth exterior that's rigid without ribs, making cleaning easier than other models. A 2 - inch connection and an air - tight silicone seal stop odors from escaping the interceptor.
Flow Rate and Capacity
This Endura grease interceptor can work at 220°F (104°C) and has a 25 - gallon - per - minute flow rate with a minimum 50 - lb grease capacity. The open - concept internal design offers excellent grease retention and debris separation.
Specifications
| Specifications |
|---|
| Model | 3925A02LO |
| Width | 23.5 inches |
| Depth | 31 inches |
| Height | 11 inches |
| Unit Weight (Empty) | 23.9 lb |
| Flow Rate | 25 GPM |
| Grease Capacity Min | 50 lb |
| Grease Capacity Actual | 53.4 lb |
| Surface Load Capacity | 440 lb |
| Connection Size | 2 inches |
| Liquid Capacity | 18.9 gal |
| Material | Plastic |
| Maximum Temperature | 220°F / 104°C |
| Colour | Grey |
This item is CSA Certified by the Canadian Standards Association and meets NSF's standards for public health protection and food safety.
Using your Canplas 3925A02LO Low Profile Grease Interceptor is straightforward. First, install it under the sink or on the floor as it's designed for such spaces. It only needs 6 inches of extra clearance on top to access the internal parts. Connect it using the 2 - inch connection and make sure the air - tight silicone seal is in place to prevent odors.
When using, the interceptor will separate non - petroleum fats, oils, and grease from wastewater at a flow rate of 25 gallons per minute. It can handle water up to 220°F (104°C).
Here are some important notes. Don't exceed the surface load capacity of 440 lb on the tank cover. Also, make sure the grease doesn't go over the minimum capacity of 50 lb. When it gets close to or exceeds this amount, it's time to clean it.
For maintenance, the smooth exterior of the interceptor makes it easy to clean. You can use a mild detergent and a soft cloth to wipe it down. Thanks to the tool - free easy - open latches, accessing the tank interior for cleaning or inspection is a piece of cake. And remember, since it's made of engineered thermoplastic, it won't corrode, chip, or peel easily, but still handle it with care to ensure its long - lasting performance.
