The Berkel Model 829A-PLUS manual gravity feed slicer is a top - notch kitchen tool. It features a hollow - ground chromium - plated carbon steel knife from Berkel and a single - lever, dual - action built - in sharpener. The permanent, tapered guard keeps the non - slicing part of the knife covered, even when you take out the center plate. The 45° table with gauge plate interlock simplifies product feeding, giving you more consistent and uniform slices while reducing waste. With a 1/2 HP motor, a 14 - inch knife, and a large product table, it's perfect for handling large meats, cheeses, and various other products. It's easy to clean and can be disassembled quickly without any tools. Key Features: - A 1 - speed, 1/2 HP knife motor that's totally enclosed and permanently lubricated. - Comes in 115/60/1, 4.0 amps, AC, and is ETL listed. - Made of stainless steel and sanitary anodized aluminum. It disassembles fast for easy cleaning. - A 45° product table with a removable meat pusher and gauge plate interlock. - A nominal 14 - inch (350 mm) diameter knife that's hollow - ground, hardened, and polished forged chromium - plated carbon steel. - The carriage can handle food up to 11 inches (280 mm) wide, 8.5 inches (216 mm) high, or 8.5 inches (216 mm) in diameter. - Precise slice adjustment up to 3/4 inch (19 mm) thick. - A built - in, non - removable, top - mounted two - stone knife sharpener for a consistently sharp edge. - The permanent, tapered knife ring guard provides more space behind the knife for easy cleaning. - A positive, moisture - protected on/off switch with a power light indicator. - An attached 6 - foot, flexible, 3 - wire cord and plug for a grounded receptacle (5 - 15P). Specifications: - Model: 829A - PLUS - Width: 23.75 inches - Depth: 29.5 inches - Height: 21.63 inches - Voltage: 115V - Hertz: 60 Hz - Phase: 1 Phase - Amps: 4 Amps - Horsepower: 0.5 hp - Blade Size: 14 inches - RPM: 220 - Max Product Size: 11 inches x 8.5 inches or 8.5 inches (Diameter) - Cut Thickness: 0 - 19 mm / 0 - 0.75 inches - Daily Usage: Average - Slices Cheese: Yes - Material: Stainless Steel / Aluminum - Operation: Manual - Installation Type: Countertop - Type: Meat Slicer Certifications: - NSF Certified: This product meets NSF standards for public health protection and food safety. - ETL Certified: It meets North American product safety and industry standards through independent testing and inspections. - Comes with a NEMA 5 - 15P plug.

Using your Berkel 829A - PLUS meat slicer is easy. First, make sure it's properly plugged into a grounded receptacle using the 6 - foot cord and 5 - 15P plug. You can adjust the slice thickness according to your needs, with a maximum of 0.75 inches. Place your meat, cheese, or other products on the 45° product table and use the meat pusher to guide it through. The interlock on the gauge plate makes this process smooth. When it comes to safety, always keep your hands away from the knife. Make sure the on/off switch is in the 'off' position when not in use. The power light indicator will show you if the machine is powered on. For maintenance, the slicer is designed for easy cleaning. You can disassemble it quickly without any tools. After each use, wipe down the parts with a damp cloth. The stainless steel and anodized aluminum construction resists corrosion. The built - in sharpener will keep the knife edge sharp, but if you notice a significant decrease in slicing performance, you may need to check the knife for any damage. Also, keep in mind that this slicer is meant for average daily usage. Don't overload it with large volumes of products continuously.